The rotary blower uses the pressure difference between the suction port and exhaust port of the fan to automatically and continuously press oil into the main body of the fan. Drip the necessary lubricating oil into the cylinder body from the oil drip nozzle. The lubricating oil in the main body lubricates the friction surface, forms an oil film between the parts, separates it from the air, and then returns to the outlet air bag. The lubrication system is a circulating device that automatically supplies oil by using the pressure difference generated by the fan working room. The following are the 3 operations of changing lubricating oil

你先看看風機機體bai下面的du油箱，上面有個加油孔，旋zhi下孔上的螺栓就dao可以加油。跟這個zhuan孔對應的是shu油箱下面的放油孔與放油螺栓，放干凈油之后就重新擰上，從上面加油。如果找不到放油孔，可以把油箱上那兩根管子中的一根拔下來，把管子的接頭擰下來放油，那個位置基本在油箱底部，可以放凈。

First look at the Du oil tank under the fan body Bai. There is a refueling hole on it. Screw the bolt on the hole to Dao refuel. This hole corresponds to the oil drain hole and oil drain bolt under the oil tank. After the oil is drained, screw it on again and add oil from above. If you can't find the oil drain hole, you can pull out one of the two pipes on the oil tank and screw down the joint of the pipe to drain the oil. The position is basically at the bottom of the oil tank and can be drained.

先檢查風機機體下面的油箱，上面有個加油孔，旋下孔上的螺栓就可以加油。跟這個孔對應的是油箱下面的放油孔與放油螺栓，放干凈油之后就重新擰上，從上面加油。如果找不到放油孔，可以把油箱上那兩根管子中的一根拔下來，把管子的接頭擰下來放油，那個位置基本在油箱底部，可以放凈。回轉式鼓風機售后專員提醒您定期檢查油量，注意壓力異常變化，及時清理更換空氣過濾器能延長回轉式鼓風機使用壽命。

First check the oil tank under the fan body. There is a refueling hole on it. Unscrew the bolt on the hole to refuel. This hole corresponds to the oil drain hole and oil drain bolt under the oil tank. After the oil is drained, screw it on again and add oil from above. If you can't find the oil drain hole, you can pull out one of the two pipes on the oil tank and screw down the joint of the pipe to drain the oil. The position is basically at the bottom of the oil tank and can be drained. The after-sales specialist of the rotary blower reminds you to check the oil volume regularly, pay attention to abnormal pressure changes, and clean and replace the air filter in time, which can prolong the service life of the rotary blower.

1、風機機體下面的油箱，上面有個加油孔，旋下孔上的螺栓就可以加油。跟這個孔對應的是油箱下面的放油孔與放油螺栓，放干凈油之后就重新擰上，從上面加油。

1. There is an oil filling hole on the oil tank under the fan body. Unscrew the bolt on the hole to add oil. This hole corresponds to the oil drain hole and oil drain bolt under the oil tank. After the oil is drained, screw it on again and add oil from above.

2、如果找不到放油孔，可以把油箱上那兩根管子中的一根拔下來，把管子的接頭擰下來放油，那個位置基本在油箱底部，可以放凈。再裝上新的油就可以了。

2. If you can't find the oil drain hole, you can pull out one of the two pipes on the oil tank and screw down the joint of the pipe to drain the oil. The position is basically at the bottom of the oil tank and can be drained. Just add new oil.

潤滑油系統是回轉式鼓風機的的生命線，潤滑油起到了不可或缺的作用。如果潤滑油少了或者沒有，就會很容易引起風機的損壞，因此要經常檢查潤滑油系統.

Lubricating oil system is the lifeline of rotary blower, and lubricating oil plays an indispensable role. If there is little or no lubricating oil, it will easily cause damage to the fan. Therefore, check the lubricating oil system frequently

以上就是為大家介紹的有關山東回轉風機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.tgzgw.cn/

The above is the detailed introduction of Shandong rotary fan. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.tgzgw.cn/